Differences

This shows you the differences between two versions of the page.

--- parts:nozzle_types [2020/09/24 22:47] – ↷ Page moved from nozzle_types to parts:nozzle_types joachim
+++ parts:nozzle_types [2020/10/06 01:46] (current) – [Description] joachim
@@ Line 3: / Line 3: @@
 ===== Description =====
-Standard nozzle for the robot is a rotary (turbo) nozzle, size 05 (1,35mm). However, robots that are washing in deep pens has the options to use the [[:prog:double_nozzle|double nozzle/shift head valve ]]to reach further in the pen (up to 6 meters). The double nozzle is equipped with a rotary nozzle + a 0-degree nozzle.
+Standard nozzle for the robot is a rotary (turbo) nozzle, size 0.55 (1,35mm). However, robots that are washing in deep pens has the options to use the [[:prog:double_nozzle|double nozzle/shift head valve ]]to reach further in the pen (up to 6 meters). The double nozzle is equipped with a rotary nozzle + a 0-degree nozzle.
 The size of the nozzle is carefully calculated to balance the robots weight and keep the robot steady. **Do not change nozzle to a bigger/smaller size**, it will effect the balance of the robot. A bigger hole in the nozzle will only increase the water flow!
-Use a [[:parts:water_filter|water filter]], on the incoming water to the [[user_manuals:high-pressure_washer|high-pressure washer]], for a longer nozzle lifespan.
+Use a [[:parts:water_filter|water filter]], on the incoming water to the [[:user_manuals:high-pressure_washer|high-pressure washer]], for a longer nozzle lifespan.