====== Wi-Fi ======

All EVO Cleaners from year 2020 have Wi-Fi settings. The Wi-Fi connection makes it possible for the robot to communicate even though its mobile signal is non-existent. The Wi-Fi feature requires an installed Wi-Fi at the farm. If the Wi-Fi at the farm is weak at certain areas and the robot lose the Wi-Fi connection, it will automatically go over to mobile signal until it has Wi-Fi connection again.

Once the robot is connected to a Wi-Fi and the feature is enabled, the robot will automatically connect to this Wi-Fi at each start-up (it can take up to two minutes when starting the robot to retrieve the Wi-Fi signal).

:!: The robot do not support Wi-Fi names (SSID) with special letters like Å, Ä, Ö, Æ, Ø :!:

----

===== How to connect to Wi-Fi =====

**Step 1.** From the start screen, go to settings screen.

**Step 2.** From settings, go to internet screen ({{:globe.png?nolink&25x25}}in the top left corner).

**Step 3.** Press the Wi-Fi settings button.

{{:12_internet_d1.png?direct&350x208}}

<font inherit/inherit;;#ffffff;;inherit>.</font>

**Step 4.** Press the "Wi-Fi disabled" -button to enable Wi-Fi.

{{:wifidisabled.png?direct&350x210}}

<font inherit/inherit;;#ffffff;;inherit>.</font>

**Step 5.** When the button change color to green and says "Wi-Fi enabled" the robot will search for nearby Wi-Fi's. The robot will list the three strongest signals.\\
<font inherit/inherit;;#ffffff;;inherit>…//.//</font>//i. It can take up to 2 minutes to list the Wi-Fi's. //

//{{:wifienableloading.png?direct&350x209}}//

<font inherit/inherit;;#ffffff;;inherit>//.//</font>

**Step 6.** Once the Wi-Fi's are listed, press the Wi-Fi you want to connect to.\\
:!:  The robot do not support Wi-Fi names (SSID) with special letters like Å, Ä, Ö, Æ, Ø :!: \\
//<font inherit/inherit;;#ffffff;;inherit>….</font>i. Is your Wi-Fi not listed? You can tap the large button at the top of the screen and enter the correct name (SSID) for the Wi-Fi you wish to connect to. Notice that you must spell the name/SSID of the Wi-Fi correctly. //

{{:wifienablelist.png?direct&350x210}}

<font inherit/inherit;;#ffffff;;inherit>.</font>

**Step 7.** Once you have selected/entered your Wi-Fi you will see a "Enter Wi-Fi password" -button at the bottom of the screen.

**Step 8.** Press the "Enter Wi-Fi password" -button and type the Wi-Fi password.

**Step 9.** The robot connects to the Wi-Fi. Wait until you can see a signal in the Wi-Fi bar at the top of the screen.{{:wifienablepassword.png?direct&350x210}}

<font inherit/inherit;;#ffffff;;inherit>.</font>

You are now connected to the Wi-Fi.