User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
troubleshooting:check_cable [2020/09/25 02:29] – [Check cable] usertroubleshooting:check_cable [2020/09/27 03:42] (current) – ↷ Links adapted because of a move operation user
Line 9: Line 9:
       * Check for indications of the cable having been caught on something. A cable that has been caught can have become disconnected internally.       * Check for indications of the cable having been caught on something. A cable that has been caught can have become disconnected internally.
   * Measure with a multimeter set to continuity (beep) mode   * Measure with a multimeter set to continuity (beep) mode
-      * Use the [[:electrical_drawings|electrical drawings ]]to make sure that each individual wire has connection between both ends+      * Use the [[user_manuals:electrical_drawings|electrical drawings ]]to make sure that each individual wire has connection between both ends
       * Do cross measurements between the individual wires in a cable to find short-circuits       * Do cross measurements between the individual wires in a cable to find short-circuits