User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
parts:batteries [2020/08/23 22:47] – userparts:batteries [2025/01/06 03:06] (current) – user
Line 6: Line 6:
  
 The batteries must be recharged in a well-ventilated area free of flammable materials. The batteries must be recharged in a well-ventilated area free of flammable materials.
 +
 +Keep the battery tops clean.
  
 ---- ----
  
-===== Type =====+===== Standard type =====
  
-The batteries included with the robot are 2 standard 12 V lead acid leisure batteries with 115 Ah capacity. If replaced, it's important that the batteries have the correct size and weight. Are the batteries bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight.+The batteries included with the robot are two 12 V AGM type lead acid batteries with 100 Ah capacity (part no 909244). If replaced, it's important that the batteries have the correct size and weight. Are the batteries significantly bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight.
  
-Weight: 20 kg\\ +Weight: 27 kg\\ 
-Length: 350 mm\\ +Length: 330 mm\\ 
-Width: 175 mm\\ +Width: 173 mm\\ 
-Height: 220 mm+Height: 237 mm 
 + 
 +Compared with standard lead acid batteries, AGM type batteries are more durable and have a longer life span. 
 + 
 +Link: **[[:service:spl:1109502|Exploded view of the battery assembly. ]]** 
 + 
 +---- 
 + 
 +===== Charger ===== 
 + 
 +The charger included is a 24 V 12 A charger which plugs directly into the robot. It is available in both a 230 VAC version and a 115 VAC version.
  
 ---- ----
Line 22: Line 34:
 ===== Charging ===== ===== Charging =====
  
-  - When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on. \\ <font inherit/inherit;;#ffffff;;inherit>.</font> +1. When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on. 
-  - The charger must be connected to the robot first. \\ <font inherit/inherit;;#ffffff;;inherit>.</font> + <font inherit/inherit;;#ffffff;;inherit>.</font> 
-  - Then connect to the wall outlet. \\ <font inherit/inherit;;#ffffff;;inherit>.</font> + 
-  - When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.+2. The charger must be connected to the robot first. 
 + <font inherit/inherit;;#ffffff;;inherit>.</font> 
 + 
 +3. Then connect to the wall outlet. 
 + <font inherit/inherit;;#ffffff;;inherit>.</font> 
 + 
 +4. When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.
  
-The robot shall always be connected to the charger when not used, in order to prolong battery life. Do not let the robot stay with low charge level for any prolonged time as this damages the batteries and shortens battery lifespan. Continued use after battery low warings will also damage the batteries.+The robot shall always be connected to the charger when not used, in order to prolong battery life. Do not let the robot stay with low charge level for any prolonged time as this damages the batteries and shortens battery lifespan. Continued use after battery low warnings will also damage the batteries.
  
 If the robot has warned for low battery, charge it for at least the same amount of time that it has previously been washing before using it again. If the robot has warned for low battery, charge it for at least the same amount of time that it has previously been washing before using it again.