Differences

This shows you the differences between two versions of the page.

--- parts:batteries [2021/11/16 04:28] – user
+++ parts:batteries [2026/10/08 06:40] (current) – [Type] user
@@ Line 7: / Line 7: @@
 The batteries must be recharged in a well-ventilated area free of flammable materials.
-Keep the batteries' tops clean.
+Keep the battery tops clean.
 ----
-===== Standard type =====
+===== Type =====
-The batteries included with the robot are 2 standard 12 V lead acid leisure batteries with 115 Ah capacity. We use "Yuasa L36-115" (part no. 901108). If replaced, it's important that the batteries have the correct size and weight. Are the batteries bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight.
+The batteries included with the robot are two 12 V AGM type lead acid batteries with 100 Ah capacity (part no 909244). If replaced, it's important that the batteries have the correct size and weight. Are the batteries significantly bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight.
-Weight: 20 kg\\
+Weight: 27 kg\\
-Length: 350 mm\\
+Length: 330 mm\\
-Width: 175 mm\\
+Width: 173 mm\\
-Height: 220 mm
+Height: 237 mm
+It's recommended to replace both batteries at once as imbalance can shorten lifespan. It's recommended to use batteries suitable for deep-cycling.
 Link: **[[:service:spl:1109502|Exploded view of the battery assembly. ]]**
@@ Line 24: / Line 26: @@
 ----
-===== AGM type =====
+===== Charger =====
-Optionally the robot can be equipped with AGM type batteries (part no, 1209244). Compared witht hte standard type batteries th run time increases significantly with the AGM batteries. In addition to that, AGM batteries are more durable and have a longer life span compared to the standard batteries.
+The charger included is a 24 V 12 A charger which plugs directly into the robot. It is available in both a 230 VAC version and a 115 VAC version.
 ----
-===== Charger =====
+===== Charging =====
-The charger included is a 24 V 12 A charger wich plugs directly into the robot. It is available in both a 230 VAC version and a 115 VAC version.
+. When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on.
-----
+. The charger must be connected to the robot first.
-===== Charging =====
+. Then connect to the wall outlet.
-  - When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on. \\ <font inherit/inherit;;#ffffff;;inherit>.</font>
+. When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.
-  - The charger must be connected to the robot first. \\ <font inherit/inherit;;#ffffff;;inherit>.</font>
-  - Then connect to the wall outlet. \\ <font inherit/inherit;;#ffffff;;inherit>.</font>
-  - When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.
 The robot shall always be connected to the charger when not used, in order to prolong battery life. Do not let the robot stay with low charge level for any prolonged time as this damages the batteries and shortens battery lifespan. Continued use after battery low warnings will also damage the batteries.
@@ Line 47: / Line 46: @@
 If the robot has warned for low battery, charge it for at least the same amount of time that it has previously been washing before using it again.
+Store the robot in a heated room while charging as cold temperature can decrease battery life span.