Differences

This shows you the differences between two versions of the page.

--- parts:batteries [2023/11/07 03:20] – user
+++ parts:batteries [2023/12/28 01:59] (current) – user
@@ Line 15: / Line 15: @@
 The batteries included with the robot are 2 standard 12 V lead acid leisure batteries with 115 Ah capacity. We use "Yuasa L35-115" (part no. 901108). If replaced, it's important that the batteries have the correct size and weight. Are the batteries bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight.
-Weight: 20 kg\\
+Weight: 26 kg\\
 Length: 350 mm\\
 Width: 175 mm\\
@@ Line 38: / Line 38: @@
 ===== Charging =====
-  - When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on. \\
+. When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on.
  <font inherit/inherit;;#ffffff;;inherit>.</font>
-  - The charger must be connected to the robot first. \\
+. The charger must be connected to the robot first.
  <font inherit/inherit;;#ffffff;;inherit>.</font>
-  - Then connect to the wall outlet. \\
+. Then connect to the wall outlet.
  <font inherit/inherit;;#ffffff;;inherit>.</font>
-  - When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.
+. When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.
 The robot shall always be connected to the charger when not used, in order to prolong battery life. Do not let the robot stay with low charge level for any prolonged time as this damages the batteries and shortens battery lifespan. Continued use after battery low warnings will also damage the batteries.