Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
prog:double_nozzle [2021/07/18 22:54] – joachim | prog:double_nozzle [2024/04/03 01:52] (current) – joachim | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Double nozzle ====== | + | ====== Double nozzle |
Part number: 1101201 | Part number: 1101201 | ||
Line 5: | Line 5: | ||
The double nozzle is equipped with a rotary nozzle and a 0-degree nozzle. This double nozzle is used to reach further in deep pens. The 0-degree nozzle can reach up to six meters. However, use the rotary nozzle as much as possible if your robot is equipped with the double nozzle. The rotary nozzle are the most efficient one to use. Only use the 0-degree nozzle to reach the end of the pen. | The double nozzle is equipped with a rotary nozzle and a 0-degree nozzle. This double nozzle is used to reach further in deep pens. The 0-degree nozzle can reach up to six meters. However, use the rotary nozzle as much as possible if your robot is equipped with the double nozzle. The rotary nozzle are the most efficient one to use. Only use the 0-degree nozzle to reach the end of the pen. | ||
- | {{: | + | {{: |
It's very important to program the robot correctly if you robot is equipped with a double nozzle. If not, there may come water from the wrong nozzle. | It's very important to program the robot correctly if you robot is equipped with a double nozzle. If not, there may come water from the wrong nozzle. | ||
Line 15: | Line 15: | ||
The double nozzle has a steel ball inside. The steel ball can move with the gravity when the water is turned off. This means that the nozzle has to be in a certain angle to make sure that the water comes from the correct nozzle when we switch the water on. The nozzle that has the steel ball closest to it will receive the water. | The double nozzle has a steel ball inside. The steel ball can move with the gravity when the water is turned off. This means that the nozzle has to be in a certain angle to make sure that the water comes from the correct nozzle when we switch the water on. The nozzle that has the steel ball closest to it will receive the water. | ||
- | {{ : | + | {{ : |
Same if the 0-degree nozzle is placed straight down. | Same if the 0-degree nozzle is placed straight down. |