Differences

This shows you the differences between two versions of the page.

--- prog:double_nozzle [2024/04/03 01:51] – joachim
+++ prog:double_nozzle [2024/04/03 01:52] (current) – joachim
@@ Line 15: / Line 15: @@
 The double nozzle has a steel ball inside. The steel ball can move with the gravity when the water is turned off. This means that the nozzle has to be in a certain angle to make sure that the water comes from the correct nozzle when we switch the water on. The nozzle that has the steel ball closest to it will receive the water.
-{{  :doublenozzleguide.png?nolink&}}When the rotary nozzle is placed straight down (and arm position approx. 45 degrees or 135 degrees from the boom) the steel ball will fall down towards the rotary nozzle. The steel ball will in this case block the 0-degree nozzle which means that the rotary nozzle will be the one who receives the water when it's turned on.
+{{  :doublenozzleguide.png?nolink&180x326}}When the rotary nozzle is placed straight down (and arm position approx. 45 degrees or 135 degrees from the boom) the steel ball will fall down towards the rotary nozzle. The steel ball will in this case block the 0-degree nozzle which means that the rotary nozzle will be the one who receives the water when it's turned on.
 Same if the 0-degree nozzle is placed straight down.