User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
service:service_instructions:sliding_plates_replacement [2020/09/18 02:09] – joachimservice:service_instructions:sliding_plates_replacement [2020/09/18 02:10] (current) – joachim
Line 1: Line 1:
 ====== Sliding plates replacement ====== ====== Sliding plates replacement ======
  
-This instruction will guide you on how to replace the sliding plates.+This instruction will guide you on how to replace the sliding plates. This instruction could also be used if you need to scrape you sliding plates or check the condition.
  
 Sliding plates are a wear part that needs to be replaced when symptoms occur. For how long one pair of sliding plates last is all individual for each EVO Cleaner. It all depends on how heavy effected the telescope is in each program and how often the robot washes. Sliding plates are a wear part that needs to be replaced when symptoms occur. For how long one pair of sliding plates last is all individual for each EVO Cleaner. It all depends on how heavy effected the telescope is in each program and how often the robot washes.
Line 23: Line 23:
 **3.**Locate the current sliding plates**. ** **3.**Locate the current sliding plates**. **
  
-**4.**The outer narrower sliding plate is mounted with two screws underneath and the wider sliding plate is mounted with four screws underneath.** **+**4.**The outer narrower sliding plate is mounted with two screws underneath and the wider sliding plate is mounted with four screws underneath.
  
-**​​​​​​​{{:slidingplatesposition.png?nolink&278x298}}{{:slidingplatesfromfront.png?nolink&307x300}}**+**{{:slidingplatesposition.png?nolink&278x298}}{{:slidingplatesfromfront.png?nolink&307x300}}**
  
 **5.**  Remove the screws on one sliding plate first. Make sure that you don’t lose any spring washers. If we don’t use spring washers, the screw will go through the sliding plate and hit the sliding rail directly. **5.**  Remove the screws on one sliding plate first. Make sure that you don’t lose any spring washers. If we don’t use spring washers, the screw will go through the sliding plate and hit the sliding rail directly.