Differences

This shows you the differences between two versions of the page.

--- service:service_instructions:sliding_plates_replacement [2020/09/18 02:10] – joachim
+++ service:service_instructions:sliding_plates_replacement [2026/09/08 23:30] (current) – external edit 127.0.0.1
@@ Line 33: / Line 33: @@
 **6.**  Lift the telescopes sliding rail so you release some pressure against the sliding plate as you simultaneously take the smaller screwdriver in one of the screw holes underneath and tries to push the sliding plate outwards until you can grab it. If you dismount the side plates you can also get a hook of any kind and pull the plate out from behind.
-  * **i.**  The wider plate could be a bit more difficult to get out. If so, you could also bend the plate out with something pointed from the triangle formed corner holes at the front as you can see in the picture. \\ **{{:slidingplatewide.png?nolink&443x133}}******
+  * **i.**  The wider plate could be a bit more difficult to get out. If so, you could also bend the plate out with something pointed from the triangle formed corner holes at the front as you can see in the picture. \\ **{{:slidingplatewide.png?nolink&443x133}}**
 **7.**  Mount the new sliding plate with wax. The track with the wax must be up against the sliding rail and outwards, towards the arm so to say.
-**8.**  Mount the screws. Lift the sliding rail again, so we have as much space as possible and it even helps to match up the screw with the screw holes. \\ :!: <font 12pt/Arial,Helvetica,sans-serif;;inherit;;inherit>The threads are plastic and can easily break. Do not screw too tight. :!:</font>
+**8.**  Mount the screws. Lift the sliding rail again, so we have as much space as possible and it even helps to match up the screw with the screw holes. \\ :!: The threads are plastic and can easily break. Do not screw too tight. :!:
 **9.**  Now take the other sliding plate.