User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
parts:batteries [2023/11/22 02:17] – [Charging] joachimparts:batteries [2026/10/08 06:40] (current) – [Type] user
Line 7: Line 7:
 The batteries must be recharged in a well-ventilated area free of flammable materials. The batteries must be recharged in a well-ventilated area free of flammable materials.
  
-Keep the batteries' tops clean.+Keep the battery tops clean.
  
 ---- ----
  
-===== Standard type =====+===== Type =====
  
-The batteries included with the robot are 2 standard 12 V lead acid leisure batteries with 115 Ah capacity. We use "Yuasa L35-115" (part no. 901108). If replaced, it's important that the batteries have the correct size and weight. Are the batteries bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight.+The batteries included with the robot are two 12 V AGM type lead acid batteries with 100 Ah capacity (part no 909244). If replaced, it's important that the batteries have the correct size and weight. Are the batteries significantly bigger they will not fit. If they are lighter there is a risk that the robot will overturn due to the too low weight. 
  
-Weight: 20 kg\\ +Weight: 27 kg\\ 
-Length: 350 mm\\ +Length: 330 mm\\ 
-Width: 175 mm\\ +Width: 173 mm\\ 
-Height: 220 mm+Height: 237 mm 
 + 
 +It's recommended to replace both batteries at once as imbalance can shorten lifespan. It's recommended to use batteries suitable for deep-cycling. 
  
 Link: **[[:service:spl:1109502|Exploded view of the battery assembly. ]]** Link: **[[:service:spl:1109502|Exploded view of the battery assembly. ]]**
- 
----- 
- 
-===== AGM type ===== 
- 
-Optionally the robot can be equipped with AGM type batteries (part no, 909244). Compared with the standard type batteries th run time increases significantly with the AGM batteries. In addition to that, AGM batteries are more durable and have a longer life span compared to the standard batteries. 
  
 ---- ----
Line 39: Line 35:
  
 1. When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on. 1. When charging the batteries, the robot must be switched off. The batteries cannot be charged when the robot is on.
- <font inherit/inherit;;#ffffff;;inherit>.</font> 
  
 2. The charger must be connected to the robot first. 2. The charger must be connected to the robot first.
- <font inherit/inherit;;#ffffff;;inherit>.</font> 
  
 3. Then connect to the wall outlet. 3. Then connect to the wall outlet.
- <font inherit/inherit;;#ffffff;;inherit>.</font> 
  
 4. When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details. 4. When the charger is connected to the wall outlet only the orange status light should be turned on. See the charger manual for details.
Line 53: Line 46:
 If the robot has warned for low battery, charge it for at least the same amount of time that it has previously been washing before using it again. If the robot has warned for low battery, charge it for at least the same amount of time that it has previously been washing before using it again.
  
 +Store the robot in a heated room while charging as cold temperature can decrease battery life span.