This is a hard alarm.

Low water pressure was detected. The water pressure was below about 50 bar for more than 2 minutes.

• Check the water hose for damages/leakage
• Check on the right side of hose reel if lock ring is positioned correctly
• Check swivel and hose that goes to the magnetic valve for damages/leakage (right hose reel side has to be taken off)
• Check that the pressure washer delivers water with sufficient pressure
  • Check that the flow is sufficient to the pressure washer and that there is no too much water directed elsewhere in the facilities
  • Make sure the pressure washer is in good condition. Pressure washers needs service too.
• Check that the strainer at the end of the long hose is clean from debris