Differences

This shows you the differences between two versions of the page.

--- troubleshooting:alarm:water_pressure_too_low [2023/05/08 06:47] – [Troubleshooting] joachim
+++ troubleshooting:alarm:water_pressure_too_low [2024/08/21 11:08] (current) – user
@@ Line 1: / Line 1: @@
 ====== Water pressure too low ======
-This is a [[troubleshooting:hard_alarms|hard]] alarm.
+This is a [[:troubleshooting:hard_alarms|hard]] alarm.
 ===== Description =====
 Low water pressure was detected. The water pressure was below about 50 bar for more than 2 minutes.
 ===== Troubleshooting =====
   * Check the water hose for damages/leakage
-  * Check on the right side of hose reel if lock ring has jumped off
+  * Check on the right side of hose reel if lock ring is positioned correctly
   * Check swivel and hose that goes to the magnetic valve for damages/leakage (right hose reel side has to be taken off)
   * Check that the pressure washer delivers water with sufficient pressure
-  * Make sure the pressure washer is in good condition. Pressure washers needs service too.
+      * Check that the flow is sufficient to the pressure washer and that there is no too much water directed elsewhere in the facilities
+      * Make sure the pressure washer is in good condition. Pressure washers needs service too.
+  * Check that the strainer at the end of the long hose is clean from debris