Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| troubleshooting:no_alarm:motor_problem [2023/09/14 07:34] – [Troubleshooting] joachim | troubleshooting:no_alarm:motor_problem [2023/09/14 22:48] (current) – [Troubleshooting] joachim | ||
|---|---|---|---|
| Line 21: | Line 21: | ||
| * Check that the emergency stop button is not pressed down | * Check that the emergency stop button is not pressed down | ||
| * Spray connectors with 5-56 or WD-40 | * Spray connectors with 5-56 or WD-40 | ||
| - | * If you have access to a spare motor you can connect it temporarily to the connector in order to troubleshoot the function. Remember to ground it properly, e.g. by holding a motor metal part against robot chassie. | + | * If you have access to a spare motor you can connect it temporarily to the connector in order to troubleshoot the function. Remember to ground it properly, e.g. by holding a motor metal part against robot chassie |
| - | * Nozzle getting stuck by itself. #873 | + | |