Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
user_maintenance [2022/09/05 06:55] – lars_enviro | user_maintenance [2024/05/23 23:43] (current) – user | ||
---|---|---|---|
Line 1: | Line 1: | ||
====== User Maintenance ====== | ====== User Maintenance ====== | ||
- | To keep the robot working | + | To keep the robot working |
===== Before every wash: ===== | ===== Before every wash: ===== | ||
Line 7: | Line 7: | ||
* Check for water leakage. | * Check for water leakage. | ||
* Check side wheels for not being empty of air. | * Check side wheels for not being empty of air. | ||
+ | * Check that hose is evenly distributed on reel. | ||
===== After every wash: ===== | ===== After every wash: ===== | ||
- | * Rinse the robot directly after it has finished washing, it will be easier because the dirt has not yet dried to the robot. Clean the robot on both inside, outside and rinse the boom with telescope driven fully out. Clean robots perform better. | + | * Rinse the robot directly after it has finished washing, it will be easier because the dirt has not yet dried to the robot. Clean the robot on both inside, outside and rinse the boom with telescope driven fully out. Clean robots perform better. Remember to not use high pressure when cleaning the robot. |
- | + | * If you use disinfectant on the robot, make sure to rinse it off according to instructions on the container. Long time exposure can damage surfaces. | |
- | Remember to not use high pressure when cleaning the robot. | + | * Put on charge, the batteries |
- | + | * Keep hood open when storing the robot. This will have mice for not being inside of the robot and will keep cables from being chewed on. | |
- | * Put on charge, the batteries | + | |
- | * Keep hood open when storing the robot. This will have mice from being inside of the robot and will keep cables from being chewed on. | + | |
===== Every third month: ===== | ===== Every third month: ===== | ||
- | * Take side covers off the telescope and rinse the complete telescope. Dried dirt inside telescope will increase alarms, so rinse inside as much as you can. | + | * Take side covers off the telescope and rinse the complete telescope. Dried dirt inside telescope will increase alarms, so rinse inside as much as you can. Use soap to get the extra grease layer off. |
- | + | ||
- | Use soap to get the extra grease layer off. | + | |
- | ===== Every six months: ===== | + | ===== Every sixth month: ===== |
* Check the working hours of the robot. We recommend changing the sliding plates after 600 hour of washing, to keep telescope running smooth. | * Check the working hours of the robot. We recommend changing the sliding plates after 600 hour of washing, to keep telescope running smooth. |