User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
troubleshooting:no_alarm:heavy_wear_hoses [2020/09/14 02:39] – ↷ Page moved from no_alarm:heavy_wear_hoses to troubleshooting:no_alarm:heavy_wear_hoses joachimtroubleshooting:no_alarm:heavy_wear_hoses [2020/09/28 02:54] (current) – ↷ Links adapted because of a move operation joachim
Line 6: Line 6:
 Wear on EVO Cleaner's hose differs very little from the wear you have on the hose when you wash manually. Since the robot lays out hose from the hose reel and does not drag it on the floor or around corners, it actually happens that the wear is somewhat less when washing with our robot. Wear on EVO Cleaner's hose differs very little from the wear you have on the hose when you wash manually. Since the robot lays out hose from the hose reel and does not drag it on the floor or around corners, it actually happens that the wear is somewhat less when washing with our robot.
  
-  * Vibrations generates from the [[:high-pressure_cleaner|high-pressure washer.]]+  * Vibrations generates from the [[user_manuals:high-pressure_washer|high-pressure washer.]]
   * Since the floor is often rough sanded, the hose wears out a lot by the vibrations. It will be even worse if you pull the hose around a corner. Door opening for example.   * Since the floor is often rough sanded, the hose wears out a lot by the vibrations. It will be even worse if you pull the hose around a corner. Door opening for example.
  
Line 12: Line 12:
  
  
-===== Trouleshooting =====+===== Troubleshooting =====
  
   * If possible, place the high-pressure washer at the door opening. \\ <font inherit/inherit;;#ffffff;;inherit>..</font>   * If possible, place the high-pressure washer at the door opening. \\ <font inherit/inherit;;#ffffff;;inherit>..</font>
Line 18: Line 18:
   * If the outer casing of the hose wears out so that you have holes in the steel reinforcement, it will start to rust and will eventually rupture. If you see damage in the casing, tape so you delay the corrosion. \\ <font inherit/inherit;;#ffffff;;inherit>..</font>   * If the outer casing of the hose wears out so that you have holes in the steel reinforcement, it will start to rust and will eventually rupture. If you see damage in the casing, tape so you delay the corrosion. \\ <font inherit/inherit;;#ffffff;;inherit>..</font>
   * It is important to have a high-pressure washer in a good condition. If a 4-cylinder pump only pumps with 3 cylinders, the vibrations will be greater. You also get a pressure drop and a poorer washing result. Have service on your high-pressure washer every 500 hours is a good advice in order to have a healthy high-pressure washer. \\ <font inherit/inherit;;#ffffff;;inherit>..</font>   * It is important to have a high-pressure washer in a good condition. If a 4-cylinder pump only pumps with 3 cylinders, the vibrations will be greater. You also get a pressure drop and a poorer washing result. Have service on your high-pressure washer every 500 hours is a good advice in order to have a healthy high-pressure washer. \\ <font inherit/inherit;;#ffffff;;inherit>..</font>
-  * A good investment is also an accumulator immediately after the high-pressure outlet on the high-pressure washer. Available for purchase from us and it also includes a relief valve to relieve pressure when disconnecting the hose from the high-pressure washer.+  * A good investment is also an accumulator immediately after the high-pressure outlet on the high-pressure washer. This will lower the vibrations in the hose. Available for purchase from us and it also includes a relief valve to relieve pressure when disconnecting the hose from the high-pressure washer.