Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| troubleshooting:no_alarm:heavy_wear_hoses [2020/09/28 02:54] – ↷ Links adapted because of a move operation joachim | troubleshooting:no_alarm:heavy_wear_hoses [2026/09/08 23:30] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Heavy wear on hoses ====== | ====== Heavy wear on hoses ====== | ||
| - | |||
| ===== Description ===== | ===== Description ===== | ||
| Line 10: | Line 9: | ||
| ---- | ---- | ||
| - | |||
| ===== Troubleshooting ===== | ===== Troubleshooting ===== | ||
| - | * If possible, place the high-pressure washer at the door opening. | + | * If possible, place the high-pressure washer at the door opening. |
| - | * If you must have the hose around corners we recommend to use an external hose to prevent wear on the robots hose. However, if you use an external hose, make sure it is fixated at the start of the aisle. It is very important that the external hose can't be pulled in by the hose reel motor. That will lead to an [[: | + | * If you must have the hose around corners we recommend to use an external hose to prevent wear on the robots hose. However, if you use an external hose, make sure it is fixated at the start of the aisle. It is very important that the external hose can't be pulled in by the hose reel motor. That will lead to an [[: |
| - | * If the outer casing of the hose wears out so that you have holes in the steel reinforcement, | + | * If the outer casing of the hose wears out so that you have holes in the steel reinforcement, |
| - | * It is important to have a high-pressure washer in a good condition. If a 4-cylinder pump only pumps with 3 cylinders, the vibrations will be greater. You also get a pressure drop and a poorer washing result. Have service on your high-pressure washer every 500 hours is a good advice in order to have a healthy high-pressure washer. | + | * It is important to have a high-pressure washer in a good condition. If a 4-cylinder pump only pumps with 3 cylinders, the vibrations will be greater. You also get a pressure drop and a poorer washing result. Have service on your high-pressure washer every 500 hours is a good advice in order to have a healthy high-pressure washer. |
| * A good investment is also an accumulator immediately after the high-pressure outlet on the high-pressure washer. This will lower the vibrations in the hose. Available for purchase from us and it also includes a relief valve to relieve pressure when disconnecting the hose from the high-pressure washer. | * A good investment is also an accumulator immediately after the high-pressure outlet on the high-pressure washer. This will lower the vibrations in the hose. Available for purchase from us and it also includes a relief valve to relieve pressure when disconnecting the hose from the high-pressure washer. | ||